Integra DSR-4.8 User Manual

71

• Relocate your antenna.
• Move the DVD receiver away from your TV or com-

puter.

• When listening to an AM station, operating the remote 

controller may cause noise.

• Passing cars and airplanes can cause interference.
• Concrete walls weaken radio signals.
• If nothing improves the reception, install an outdoor 

antenna.

• Make sure that the batteries are installed with the cor-

rect polarity (page 11).

• Install new batteries. Don’t mix different types of bat-

teries, or old and new batteries (page 11).

• Make sure that the remote controller is not too far 

away from the DVD receiver, and that there’s no 
obstruction between the remote controller and the 
DVD receiver’s remote control sensor (page 11).

• Make sure that the DVD receiver is not subjected to 

direct sunshine or inverter-type fluorescent lights. 
Relocate if necessary.

• If the DVD receiver is installed in a rack or cabinet 

with colored-glass doors, the remote controller may 
not work reliably when the doors are closed.

• When using the remote controller to control other 

manufacturers’ AV components, some buttons may 
not work as expected.

• Make sure you’ve entered the correct remote control 

code.

• To control another manufacturer’s TV, point the 

remote controller at the component. Be sure to enter 
the appropriate remote control code first (page 52).

• Make sure that the 

 cable and analog audio cable 

are connected properly. Connecting only an 

 cable 

won’t work (page 25).

• To control an RI Dock that’s connected via 

, point 

the remote controller at the DVD receiver.

• To use 

, you must make an 

 connection and an 

analog audio connection (RCA) between the compo-
nent and DVD receiver, even if they are connected 
digitally (page 25).

• Make sure the disc is free from dirt and dust and is not 

damaged (page 9).

• Make sure the disc is loaded with the label side face up 

and aligned properly in the disc tray guide.

• If the region number on a DVD-Video disc does not 

match the number on the receiver, the disc cannot be 
used (page 66).

• Condensation inside the receiver: Allow time for con-

densation to evaporate. Avoid using the receiver near 
an air-conditioning unit.

• Reload the disc with the label side face up.
• If the Parental Lock function is active, defeat it or 

change the level (page 64).

• Defeat special playback modes such as Repeat Play, 

Memory Playback, and Random Playback 
(pages 45–47.)

• Make sure that the disc has been loaded, and the 

track(s) you try to program are included on the disc.

•  It may take time for the DVD receiver to load and read 

a CD or DVD that contains many tracks.

•  Some settings can be changed while a disc is playing, 

but are not effective until the disc is stopped then 
restarted: Press the Stop [ ] button, then start play-
back again.

•  The “TV Shape” setting in the onscreen setup menu 

is incorrect. See page 59 for how to set it correctly for 
your TV/monitor.

• This receiver is compatible with Macro-Vision Sys-

tem copy guard. Some discs include a copy prevention 
signal, and when this type of disc is played back, 
stripes etc., may appear on some sections of the pic-
ture depending on the TV. This is not a malfunction.

• Due to the receiver’s copy protection circuits, connec-

tion of this device through a VCR or an AV selector 
may prevent recording or cause picture problems. This 
is not a malfunction.