Intel NetStructure 05-2450-001 User Manual

15

If you would like to verify that you have set up the HMP Software properly, you can run the 
verification demo. This demo simply makes an IP call using SIP to let you know that the 
installation and configuration were successful.

Note:

This step is optional, but recommended. 

To run the verification demo, perform the following:

1. Run 

dlstart

.

2. Change into the directory containing the verification demo or set it as the working directory: 

/usr/dialogic/demos/Verification/VerificationDemo/Release.

3. Run the demo using the files in /usr/dialogic/demos/Verification/VerificationDemo/Release.

When you run the demo, you will see output like the following:

                Welcome to the HMP Demonstration Program  

        The purpose of this demo is to establish a basic level

        of functionality after installing and configuring the

        Intel(R) NetStructure(TM) Host Media Processing Software.

        This application will perform some sanity checking and

        then wait for a Voice Over Internet Protocol (VOIP) call

        to be placed into the system using a SIP or H.323 VOIP

        phone configured to use the G.711 codec. After connecting

        a message prompt will be played out to the calling party.

        Press ENTER to continue.....

 

Checking that the HMP service is running.......

Getting the host IP address for eth0.....

Opening Prompt File........

Opening Voice Device.......

Opening Global Call IP Device.......

Starting the Global Call subsystem.....

 

 

        The system is initialized and ready for a call.

        Place a SIP or H.323 call to the IP address of eth0

If you need to restart HMP services, you will need to be root and use the following command 
sequence: 

dlstop;dlstart

An example of output from the 

dlstart

 command follows.

This output will vary depending on the license you have enabled.

% dlstart
STARTING INTEL DIALOGIC SERVICES

Starting CORBA Event Server:                 [ OK ]
Starting CORBA Name Server                   [ OK ]
Starting Error Logger:                       [ OK ]
Starting Device Mapper:                      [ OK ]
Starting Timeslot Doler:                     [ OK ]
Starting Intel(R) NetStructure(TM) DM-family board(s).
CHEETAHSTART: Removing temp files.