IDEAL INDUSTRIES 45-930 User Manual

17

The CPU Module (Central Processing Unit) and the Power Module are not field
repairable, they must be returned to IDEAL for service. 

The CPU is located behind the faceplate on the inside of front lid.
1. Disconnect 

power.

2. Disconnect 

air.

3.  Open front lid all the way so that it rests on top of rear cover.
4.  Remove the six #8-32 button head screws from faceplate.

The Power Module is attached to the top of rear cover.
1. Disconnect 

power.

2. Disconnect 

air.

3.  Remove the five #8-32 button head screws from the rear panel

and remove rear panel.

4.  Open lid and support Power Module while removing the four

#6-32 button head screws from top of rear cover.

5.  Slide ribbon cable to side and remove module while disconnect-

ing the five plug-in electrical connections

6.  Return entire module to IDEAL for service.
7.  Reverse process to replace module.

TWO WIRE CABLE                   RIBBON CABLE

REMOVE 4 SCREWS

5.  Lay module flat and remove the four screws from the

back of the CPU and lift cover off.

7.  Replace cover and return entire module to IDEAL for

service.

8.  Reverse process to replace module.

6.  Disconnect ribbon cable, 2 wire cable and 

pull wires out of cover.

CPU MODULE

POWER MODULE