Honeywell Work Light DR4300 User Manual

The DR4311, DR4312, DR4331 and DR4332 models include a display and keypad used to view real time 
values, change setpoints (if the recorder hardware supports outputs), and assign application-specific values 
to configuration parameters.   

This subsection describes the operator interface, using the display and keypad to configure the recorder, 
and procedures for starting up and operating the recorder.  

 

The indicators and text displayed let you see what is happening to your process and how the recorder is 
responding. 

Figure 4-1 is a view of the operator interface. A description of the displays and indicators is included. 

24278

Lower Display - six characters
    Normal operation - Displays selected
     operating parameter label and value.
     With totalization, shows totalizer value.
    Configuration mode - Displays Set Up group and
     function parameters.

Output relay 1 or 2
is ON, when lit.

Data displayed
is for input
Channel 1 or 2

Upper Display - four characters
    Normal operation - Displays process variable
    (PV) for the selected input channel.

   Configuration mode - Displays selection or
   parameter value.

Indicates controller mode:
   M = Manual
   A = Automatic

When either of the remote switches
is set for SP2, or when NumSPs = TWO
  L = Setpoint 1 (SP) active
  R = Setpoint 2 (S2) active
Otherwise, neither indicator 
is used.

Indicates temperature
units of PV on display.