Hitachi Microscope & Magnifier S-3400N User Manual

3.9  Other Functions 

3 - 118 

•  Run/Freeze operation 

Using the 

  buttons located in the right and left frames at the top of the screen, 

Panels A and B can independently be toggled Run/Freeze.    To toggle Run/Freeze both 

for Panels A and B at the same time, use the 

  button at the center. 

 

•  Capturing images 

To capture an image on one of the two screens, click the 

  button located at the top 

of the screen to be captured. To capture the images on both Panels A and B, click the 

  button located in the center. 

 

•  Saving and recording an image 

For operations such as direct photo, memory photo, direct save, quick save, direct print, 
layout print, and PC transfer can be selected by using the buttons located at the top of 
the screen.    The buttons that are displayed are identical to those displayed in the image 
recording section of the Control Panel. 

 

•  Capture resolution 

Capture resolutions 2560 

× 1920 and 5120 × 3840 are not available. 

 

•  The brightness and contrast knob assignments on the ABCC and Operation Panel 

operate on the image signal that is specified by the right or left selection button for image 
adjustment. 

 

 

 

Fig. 3.9-6    Image Adj. Button 

 

•  If the scanning speed is RED (1/2/3), the focusing monitor, the BC monitor mode, the 

alignment mode, or the filament image mode is on, an image is displayed only on the 
right or left screen. On which screen the image will be displayed depends on the settings 
that are in effect on the Image Adj. right/left button shown above.