Henkel LOCKTITE 97211 User Manual
12
2 Description
2.2 Displays, Operating Elements and Connections
1
LED Row 1-10 V OUTPUT
Displays the measured and amplified signal from the sensor during a measuring. The
best adjustment of the amplification is during a measuring (dispensing) the signal will be
not higher than 5 V. It has to be adjusted at the potentiometer 3.
At the beginning of a measuring cycle the signal increases more than the adjusted 5 V.
It shows you that the pressure sensor works well. If the sensor is damaged, no signal will
be displayed.
best adjustment of the amplification is during a measuring (dispensing) the signal will be
not higher than 5 V. It has to be adjusted at the potentiometer 3.
At the beginning of a measuring cycle the signal increases more than the adjusted 5 V.
It shows you that the pressure sensor works well. If the sensor is damaged, no signal will
be displayed.
2
4 pin Plug
for connection to controller
The supplied connection cord is connected here (Pin assignments see Section 8.2).
3
Potentiometer R10
to adjust the amplification factor
It is necessary to adjust the amplification factor for getting an optimum signal for the
interpretation at the Loctite controller.
interpretation at the Loctite controller.
4
Service Socket,
for Loctite service only
5
4 pin Socket
for connection the pressure sensor
The cable of the pressure sensor is connected here (Pin assignments see Section 8.2).
1
2
3
4
5
Loctite (Ireland) Ltd.
Made in Germany
cat. no. 97211
Tallaght Business Park
Whitestown
Tallaght, Dublin 24, Ireland