Gaggenau RB 472 User Manual

25

5. On both lengths of the furniture door, draw a parallel 

with the help of the positioning aid.

6. Lengthen the markings to the parallels using an 

angle of contact.

7. Apply the fixing ribs (b) and mark out the holes. 
8. Pre-drill the holes.
9. Screw on the fixing ribs (b).

Note:
Now attach the door handles which should have been 

screwed from behind!
1. Remove fixing bracket (a) from the appliance door. 

To do this, loosen the fastening screws (b) only.

2. Insert the removed fixing brackets (a) into the fixing 

ribs (b) on the furniture door.

3. Open the drawer.
4. Hang furniture door with the adjusting rail onto the 

threaded rods.

5. Lower furniture door and push the fixing brackets 

down over the fastening screws on the appliance 

door.

6. Adjust the furniture door using the threaded rod 

(Torx screwdriver).

Re-examine the dimensions of the crack 

continuously.

7. Close the drawer and re-examine to make sure that 

the depth of the cabinet frontage corresponds with 

the adjacent lying fronts. Correct if necessary.