CyberResearch CPEN GX-333-X User Manual

CyberResearch, Inc.  

49 

25 Business Park Drive 

 

P: (203) 483-8815; F: (203) 483-9024 

Branford, CT USA 

 

www.cyberresearch.com 

This connector provides access to one (1) or two (2) externally mounted floppy drives (3.5”-

profile, 1.44 MB type floppy drive). 

 

A standard 34-pin floppy connector cable is required for the connection to floppy drives.   

1.  Plug the standard 34-pin floppy cable connector into CN9. Make sure that the red wire 

corresponds to pin one on the connector. 

2.  Attach the appropriate connector on the other end of the cable to the floppy drive.  

 

When appropriately formatted, a compact flash disk can serve as a bootable hard drive in 

applications where installation space is limited.  The Compact Flash card occupies either the 

Master or Slave device on the Primary IDE channel.  Configuration options can be found through 

the BIOS configuration utility.   

 

Parallel port connects to a printer. The CPEx GX-333-X comes with a multi-mode 

(ECP/EPP/SPP) parallel port.  The CN17 parallel port interface features a 26-pin flat-cable 

connector that requires an adapter cable if a traditional DB-25 connector is preferred.  The 

parallel interface can be re-assigned to LPT2 or LPT3 through the BIOS configuration utility.   

 

The default interrupt channel is IRQ7.  Select ECP or EPP DMA mode using the BIOS 

configuration utility.