CyberResearch CPEN GX-333-X User Manual
CPEx GX-333-X
CyberResearch
®
CPU Cards
66
©Copyright 2007 CyberResearch, Inc.
If the EPP mode is selected in the Parallel Port Mode configuration option, you will be able to
configure the EPP Mode Select option. The EPP parallel port mode has two standards, EPP 1.7
and EP 1.9. This selection allows you to choose the standard the parallel port will operate in.
Please refer to the parallel device that your system will be connected to and select the EPP mode
accordingly.
configure the EPP Mode Select option. The EPP parallel port mode has two standards, EPP 1.7
and EP 1.9. This selection allows you to choose the standard the parallel port will operate in.
Please refer to the parallel device that your system will be connected to and select the EPP mode
accordingly.
Î EPP1.9
EPP 1.9 is selected as the EPP standard
Î EPP1.7
(D
EFAULT
)
EPP 1.7 is selected as the EPP standard
Î
x ECP Mode Use DMA [3]
If the ECP mode is selected in the Parallel Port Mode configuration option, you will be able to
configure the ECP Mode Use DMA option. This option determines the DMA channel the parallel
port uses when it is in the ECP mode.
configure the ECP Mode Use DMA option. This option determines the DMA channel the parallel
port uses when it is in the ECP mode.
Î 1
Parallel port uses DMA Channel 1 in the ECP mode
Î 3 (D
EFAULT
)
Parallel port uses DMA Channel 3 in the ECP mode
Power Management Setup
The Power Management Setup menu allows you to set the power management and saving
features in the BIOS.
features in the BIOS.
Î
Power management [APM]
The Power management option allows you to enable/disable or select one of the following
management modes.
management modes.
Î Disabled
The ACPI function is enabled
Î Legacy
The Legacy mode allows you to manually define the
PM Timers features including Standby Mode, Suspend
Mode, and the Soft-off button operations.
PM Timers features including Standby Mode, Suspend
Mode, and the Soft-off button operations.
Î APM
(D
EFAULT
)
When selected, the APM management is automatically
applied and the other configurable option is setting the
power button soft-off mode.
applied and the other configurable option is setting the
power button soft-off mode.
Î ACPI
Enables the ACPI power management mode.
Currently only the S1(POS) mode is supported on this
board.
Currently only the S1(POS) mode is supported on this
board.
Î
APM Mode
APM is briefed from Advanced Power Management. The energy-saving standby mode is initiated
in the following ways:
in the following ways:
• Time-out period specified in the BIOS Setup Utility
•
Commands from the operating system, such as the Suspend menu item in your
operating system
operating system
•
In standby mode, the SBC reduces power consumption by using the SMM
capabilities. Reducing power to or turning off Video Electronics Standards
Association (VESA) Display Power Management Signaling (DPMS)-compliant
monitors and spinning down hard disks.
capabilities. Reducing power to or turning off Video Electronics Standards
Association (VESA) Display Power Management Signaling (DPMS)-compliant
monitors and spinning down hard disks.
One noticeable point is that the operating system must support an APM driver for the
power-management features to work.
power-management features to work.