CyberPower Battery Charger CPBC10400 Leaflet

Note: 
1. The LED indicator will automatically switch off after 5 seconds from 

pressing the button.

2. When the battery pack connects to the USB power, the LED indicator will 

light indicating the charging status. Press the button for switching off the 
indicator, and simply press again to switch on the LED indicator.

• USB Battery Pack (CPBC10400 Series)

• User Guide

Battery Capacity: 10400mAh

Rated Input:  DC 5V, 2A

USB Output: 5V, 2.1A

Micro USB Output: 5V, 1A

Charging time: ~7 Hours by the 2A power

Dimension: 4.42x3.06x1.05 inch

Weight:  9.14 oz

Storage: 14 to 122˚F (-10 to 50˚C)

Operation: 32 to 104˚F (0 to 40˚C)

Charge the USB Battery Pack by attaching the USB charging 

connector to any powered USB port, including but not limited 

to the USB wall charger, desktop computer, laptop or USB 

powered hub. When charge the battery pack, the LED 

indicator would light up automatically. Press the button to turn 

off if it is not required.

Recharge the CPBC10400 Series every 3 months when not 

use to ensure the best battery performance. The battery 

capacity may decline after 300 times usage.

Before using the USB Battery Pack, please read the following 

warnings carefully. Use the product according to the 

procedures described in this manual. Failure to follow these 

safety precautions may result in fire, explosion, electrical 

shock or other dangers.

1. Do not disassemble this product, or any of its parts.　

2. Store between 14 to 122°F (-10 to 50°C).Operate between 

32 to 104°F(0 to 40°C).

3. Do not immerse this product in water or other liquids, as 

such use may result in fire or electrical shock. If water or 

other liquids enter the battery interior, unplug the product 

immediately from any attached power source or device.　

4. Do not use this product with wet hands. Moisture in or on 

this product may result in electrical shock.

5. Do not expose this product to direct flame or leave it in an 

overheated condition, as the battery may explode.

6. Store this product in a cool and dry environment when not in use.

7. Do not puncture this product. Puncturing the battery may 

cause the release of harmful substances.

8. It is normal for the USB Battery Pack to become warm 

during charging.

9. Keep this product out of the reach of children. Ensure that 

all users read these warnings and instructions before using.

10. Please recycle USB Battery Pack in accordance with local 

environmental laws and regulations

This equipment has been tested and found to comply with the 

limits for a Class B digital device, pursuant to Part 15 of the 

FCC rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential 

installation. This equipment generates uses and can radiate 

The USB Battery Pack (CPBC10400 Series) is a 

rechargeable lithium-ion battery with the high capacity that 

is designed for powering up to two mobile devices such as 

phones, MP3 players, tablets, and handheld gaming 

devices while away from other power sources.

- Compact and portable design

- Dual output

- Built in USB input power cable

- Built in micro USB output connector

- Battery life indicator

www.cpsww.com
© 2013 CyberPower Systems, Inc. 

All rights reserved. Reproduction in whole or in part without permission is prohibited.

Model: CPBC10400 Series

K09-0000171-00

1
2
3
4
5

6

USB Input Cable
Micro USB Output Connector 
Flash Light 
USB Output Port 
Power On/ LED Indicator Switch
Power Off 
Flash Light On/ Off 
LED Battery Life lndicator 

5V/ 2A USB input
5V/ 1A Micro USB output
White light 
5V/ 2.1A USB output 
Press the button
Press and hold 3 seconds
Press twice 
As the “LED INDICATOR”

table showing

1

2
3

Battery Life Indicator

Overload
Low Battery

Four LEDs represent 25%,
50%, 75% and 100% battery
life from left to right side. 
All four LEDs are flash simultaneously.
The first LED is flashes rapidly.

C.The battery pack is 

charging the device 

and the power source 

is charging the 

battery pack 

simultaneously.

The device can’t be charged 

when the power source is 

charging the battery pack. 

The solution is to remove the 

device from the battery pack.

Power bank
does not
charge

a.Incorrect connection 

between charger and 

USB Battery Pack.

b.No power from the 

source.

C.Short Circuit of 

battery pack product

Re-attach the USB connector 

to the USB port.

a.Check that power is provided 

to the USB port.

b. The battery pack has a low 

charge.  Recharge the 

power battery pack.

Reset the battery pack.

USB Battery
Pack does
not power
the device

a.The power of device 

is over specification.

b.The battery is out     

of power

Check the power specification 

of the device before charging 

with the CPBC10400 Series
Charge the battery pack via a 

USB port.

1

2

3

4

5

6

radio frequency energy and if not installed and used in 

accordance with the instructions, may cause harmful 

interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful 

interference to radio or television reception, which can be 

determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or 

more of the following measures: 

• Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and 

receiver.

– Connect the equipment into an outlet on a circuit 

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician 

for help.

If the LED indicator extinguishes automatically during the 

charging process, press the button to revert.

Changes or modifications not expressly approved by the 

party responsible for compliance with the FCC Rules could 

void the user’s authority to operate this equipment.

CyberPower offers limited product warranty for the hardware of 

the USB Battery Pack* and the product is free from material 

and manufacturing defects for one year. (*battery excluded)  A 

reasonable purchase proof with date must be provided when 

submission. CyberPower's sole responsibility is to repair or 

replace the product if a material or manufacturing defect results 

in product failure during its normal use. The warranty is void if 

the product is damaged due to abuse, alteration, misuse, 

negligence, incorrect voltage supply, air/water pollution, 

accidents and natural disasters.