Crane Merchandising Systems Beverage Dispenser 675 User Manual
HDC II Programming Guide
Test the Machine
July, 2003
70
6730018
DOWNLOAD DATA TO A PDCD
1.
Connect your portable data collection device (PDCD) in accordance with its
operating instructions.
operating instructions.
2.
Press
. Data is downloaded into your PDCD.
NOTE
Depending upon the setting selected in "Set Printer or DEX Options",
PAGE 10, data may be cleared after the download is complete.
3.
CONTINUE.
SV.ERR PCB
SureVend™ is ON but not working. The last calibration sam-
ple was 255. Check that the SureVend™ PCB is present at
J34.
ple was 255. Check that the SureVend™ PCB is present at
J34.
SV.ERR SNSR
SureVend™ is ON but not working. The last calibration sam-
ple was
ple was
≤
50. Check for a blocked sensor or disconnected har-
ness.
AJP.TMR1 XX
SureVend™ is active and ring 1 anti-jackpot timer is ON. XX
is a value between 1 and 99 in minutes.
is a value between 1 and 99 in minutes.
AJP.TMR2 XX
SureVend™ is active and ring 2 anti-jackpot timer is ON. XX
is a value between 1 and 99 in minutes, and represents the
amount of time left on the anti-jackpot timer for this cup ring.
is a value between 1 and 99 in minutes, and represents the
amount of time left on the anti-jackpot timer for this cup ring.
FLTR PAPER
Brewer filter paper is empty.
NO BREWER
Brewer is missing or malfunctioning.
BREWER.ERR
The brewer is in an incorrect position.
BREWER JAM
The brewer has not reached an appropriate position within a
certain timeout period. Check for a physical jam or a motor
stall condition.
certain timeout period. Check for a physical jam or a motor
stall condition.
RESET BRWR
The brewer is clamped and not vending, or is not in a brewer
test mode. Close the door (if open), or run a brew test.
test mode. Close the door (if open), or run a brew test.