Eaton 5130i3000-XL2U 103006593-6591 Leaflet

Product codes
103006593-6591
Page of 2
Eaton 5130 UPS
1250, 1750, 2500, 3000 VA
 
Powerware series
Advanced power protection for:
•   IT and networking environments
•   Servers, networking gear
•   Telecommunications, VoIP, security systems
Line interactive UPS
Highest power performance
The 5130 protects connected equipment from five of the
most common power anomalies: failures, surges, sags,
under-voltage and overvoltage.
0.9 power factor: more real power to your protected load.
By delivering more real output power, the 5130 powers
more servers than another UPS of equivalent VA rating with
a lower power factor. 5130 is compatible with all modern IT
equipment.
Unmatched reliability
Load segment control enables prioritized shutdown of non-
essential equipment during outages to maximize battery
runtime for critical devices. Load segment control can also
be used to remotely re-boot locked-up network equipment
or manage scheduled shutdowns and sequential startups.
You can extend the runtime to several hours by adding up to
four external battery modules. Each external battery module
occupies only 2U for most models (3U for reduced depth,
3000 VA models).
With hot-swappable batteries, you can replace a battery
module without disrupting server room operations or power
to protected equipment. With an optional, hot-swap mainte-
nance bypass module, you can even replace the entire UPS.
Outstanding versatility
The UPS offers the choice of rackmount or tower installa-
tion. Pedestal (on 2U models) and rail kits are included at no
extra charge.
The 2U model is optimized for rack mounting but is eas-
ily deployed as a tower. The 3U unit is optimized for tower
deployment or short-depth racks, which makes it especially
suitable for telecom equipment racks
The 5130 offers Serial and USB communication plus an
extra slot for optional communication card (including SNMP/
Web card, relay contact card) allowing remote monitoring in
a variety of networking environments.
The UPS comes complete with the Eaton Software Suite
CD, including SNMP compatible power management
software.
2U rackmount installation