Compex Technologies NetPassage 15B User Manual
Chapter 2 Getting Started
9
Press on the Obtain an IP
address automatically
radio button and press the
OK button.
address automatically
radio button and press the
OK button.
Figure 2.2.1-2
Network Configuration
Window
Network Configuration
Window
4. Press the OK button again to close the network configuration window. The
Microsoft Windows will then prompt you to restart the computer. Press the OK
button to reboot.
button to reboot.
When the Microsoft Windows restarts, NetPassage 15B will assign an IP address,
Subnet Mask and Gateway information to the computer.
Subnet Mask and Gateway information to the computer.
For Microsoft Windows 2000/XP
1. Open the Control Panel from the Start menu
2. Double-click on the Network Connections icon.
3. Double-click on the network icon that you will be using to connect to NetPassage
2. Double-click on the Network Connections icon.
3. Double-click on the network icon that you will be using to connect to NetPassage
15B for configuration, the network configuration window shall be displayed as
shown in Figure 2.2.1-3.
shown in Figure 2.2.1-3.
Please ensure that the correct
network adapter is selected.
network adapter is selected.
Figure 2.2.1-3
Network Configuration
Window
Network Configuration
Window
4. Double-click on the TCP/IP connection, the TCP/IP configuration window shall be
displayed, as shown in Figure 2.2.1-4.