Compex Technologies NetPassage 15B User Manual
Chapter 2 Getting Started
13
4. Double-click on the TCP/IP connection, the TCP/IP configuration window shall be
displayed, as shown in Figure 2.2.2-5.
Type in the IP Address and
Subnet Mask of
192.168.168.X and
255.255.255.0 espectively.
Type in the Default gateway
as 192.168.168.1. Type in
the IP address of your DNS
server in the Preferred DNS
Server field.
Subnet Mask of
192.168.168.X and
255.255.255.0 espectively.
Type in the Default gateway
as 192.168.168.1. Type in
the IP address of your DNS
server in the Preferred DNS
Server field.
Figure 2.2.2-5
Network Configuration
Window
Network Configuration
Window
5. Press the OK button again to close the network configuration window. The new
network configuration will be registered on your network card.
2.3
Connecting to the Configuration Interface
Compex NetPassage 15B is integrated with an embedded HTTP Server to provide a
user-friendly web-based configuration interface. Alternatively, you may also connect to
the Command Console of NetPassage 15B via a TELNET session or a direct serial
connection.
user-friendly web-based configuration interface. Alternatively, you may also connect to
the Command Console of NetPassage 15B via a TELNET session or a direct serial
connection.
This section assumes that the IP address of your NetPassage 15B has not been changed.
It is still the default IP of 192.168.168.1.
It is still the default IP of 192.168.168.1.
This section also assumes that the TCP/IP settings of your computer have been
configured properly. To make sure that the TCP/IP of your computer has been
configured properly, perform the following command at the DOS prompt:
configured properly. To make sure that the TCP/IP of your computer has been
configured properly, perform the following command at the DOS prompt:
C:\WINDOWS\PING 192.168.168.1
If you receive replies from the above command, it indicates that your computer has been
properly configured with TCP/IP.
properly configured with TCP/IP.