Compex Technologies NetPassage 15B User Manual

Chapter 3 Configuring NetPassage 15B

26

4. Enter the Username, Password and Idling Timeout value to the fields and press

the Save button.

5. Press the Reboot button to complete the configuration process.

You should select this WAN type only if you are a subscriber of Big Pond Cable
Internet in Australia. If you have subscribed to OPTUS in Australia, please go to
Section 3.2.1 titled Cable Internet with Dynamic IP Assignment. Please note that
OPTUS requires a DHCP Client ID before releasing an IP address to you.

1. Click on the 

 URL from the Command Menu and the WAN

configuration page will be displayed, as shown in Figure 3.2.2-1.

2. Press the Change button and the list of supported WAN type will be displayed, as

shown in Figure 3.2.1-2.

3. Check the Australia BPA Cable radio button and press the Save button. The

configuration page for Big Pond Australia will be displayed, as shown in Figure
3.2.5-1.

Figure 3.2.5-1
Big Pond Australia
Configuration Page

4. Enter the Username, Password and Idling Timeout to the fields and press the

Save button.

5. Press the Reboot button to complete the configuration process.

Compex NetPassage 15B has been designed with a Network Address Translator (NAT)
that supports Port Address Translation (PAT), sharing a single public IP address with
multiple computers in the private network by using different TCP ports for different
computers. By default, the NAT is enabled.