Force10 Networks S2410s User Manual

290

ACL Commands

mac access-list extended

The 

assign-queue 

and 

redirect

 parameters are only valid for a 

permit

 rule.

Mac Access List Config 

 

mac access-list extended

This command creates a MAC Access Control List (ACL) identified by 

, consisting of 

classification fields defined for the Layer 2 header of an Ethernet frame. .

The 

no

 version of this command deletes a MAC ACL identified by 

 from the system.

mac access-list extended name

 

Global Config

 

novell 0x8137, 

0x8138

pppoe 0x8863, 

0x8864

rarp 0x8035

Table 23   Ethertype Keyword and 4-digit Hexadecimal Value (continued)

Identify an interface range and access the Interface Range mode.

In the Interface Port Channel Config mode, attach a MAC ACL to the 
selected port channel.

Attach a specific MAC Access Control List (ACL) identified by 

 

to an interface in the ingress direction.

Create a MAC ACL.

Display the rules defined for the MAC access list specified by 

.

Note: The CLI mode is changed to Mac Access List Config (prompt is “

hostname 

(Mac-Access-List Config)#”) when this command is successfully executed. If a MAC 
ACL by this name already exists, this command simply invokes the mode.

Case-sensitive alphanumeric string from 1 to 31 characters uniquely 
identifying the MAC access list. The string may include alphabetic, 
numeric, dash, dot or underscore characters only. The string must start 
with a letter.

Creates a new rule for the MAC access list selected by the 

mac 

access-list extended 

command.

Defines an interface range and accesses the Interface Range mode