FireplaceXtrordinair 36 DV EFIII User Manual

4040708

Burn the heater at a high setting with the blower off for an extended period (up to 48 hours).  This will
cure the painted surfaces.  Fumes from the paint curing and oil burning off the steel will occur.  This is
normal.  We recommend opening a window to vent the room.

Condensation may appear on the glass each time you start the fireplace - this is normal.

Blue Flames will occur on the fireplace when it first comes on.  After fifteen minutes the flames will
turn a more realistic yellow and orange color.

Certain installations use a remote "wall switch" to turn the fireplace on and off.  If this is the case, leave
the ON/OFF switch "ON".

OF

F

ON

Use this switch to 
turn the main burner 
on and off manually.  

After the pilot has been started...

See the instructions included 
with the remote for details on 
operation.

For systems with wall 
thermostats,  use this switch to 
control the temperature (right 
is hotter, left cooler).  Some 
systems require the on/off 
switch to be on.

See the instructions 
included with the 
remote for changing 
the battery.

Do not place any combustible items on top of or directly in front of the fireplace, even temporarily.  The
optional thermostat may start the fireplace causing a combustible item to ignite.

If the fireplace turns on and off frequently while using the thermostat, you may want to adjust the flame
height down until it produces just enough heat needed.

Your fireplace has an adjustable flame to tailor the look and heat output to your specific needs.  It is
adjusted by turning the middle dial on the gas control valve.

Flame Height 
Adjustment Knob

Index Mark

Turn counter-clockwise to adjust the flame higher, clockwise to lower.