CK Electric Part C3000 User Manual

MPC-3000—USERS MANUAL/V000/07-97

Chapter 4

Sending Faxes With the MultiPASS C3000 4-3

The MultiPASS C3000 begins

scanning the document, and dials

the number.

❍

After a moment, the display shows the transaction

number for the fax. This is a unique number the

MultiPASS C3000 assigns to the document and uses to

identify the document in transaction reports:

The display continues to show these three displays in

order while the fax is being sent.

❍

The MultiPASS C3000 beeps once to indicate that the

document has been sent successfully.

The MultiPASS C3000 automatically redials if the receiving

fax does not answer, if the line is busy, or if a transmission

error occurs. You can specify the number of times it redials

using the Automatic Retries option in the Send Fax dialog

box of the MultiPASS Desktop Manager (see page 8-4). If all

redial attempts fail, the MultiPASS C3000 beeps

intermittently for a few seconds. If this happens, check the fax

number and try sending the fax again.
If the 

ALARM

light is flashing, correct the error described in

the LCD display, and then press 

. You may need to open

the operator panel to remove the document from the ADF

(see page 10-3).

TRANSMITTING OK

TX/RX NO.       XXXX

TRANSMIT

SCANNING

SCANNING

START/COPY

Press START/COPY.