FANUC Robotics America GFK-1541B User Manual

The IC697CMM742 Series 90-70 Ethernet Interface (Type 2) is equipped with an AUI port for
connecting to the network.  The IEEE 802.3 AUI (Attachment Unit Interface) is standard across a
variety of different physical media.  Compatible transceivers can be purchased that support
10Base5 and 10Base2 coaxial cables as well as twisted pair and fiber optic cables.  The standard
AUI makes your selection of transceiver and trunk cable medium transparent to the Ethernet
Interface.

Your cables must meet the applicable IEEE 802.3 standards.

This section presents the information you need to specify the cables and related components
required for Ethernet Communications, including Attachment Unit Interface (AUI) port pinouts
and AUI cable diagrams.

The AUI port is a 15-pin D-type female connector.  It is used to connect the Ethernet Interface to
an external transceiver.

1

GND

Signal Ground

2

CP+

Collision Presence +

3

Tx+

Transmit +

4

GND

Signal Ground

5

RX+

Receive +

6

GND

Signal Ground

7

NC

Not Connected

8

GND

Signal Ground

9

CP-

Collision Presence -

10

Tx-

Transmit -

11

GND

Signal Ground

12

RX-

Receive -

13

+12

+12 Volts

14

GND

Signal Ground

15

NC

Not Connected

SHELL

Chassis Ground

Pinouts are provided for troubleshooting purposes only.  Cables are readily
available from commercial distributors. GE Fanuc recommends purchasing
rather than making transceiver cables.

www.cadfamily.com    EMail:cadserv21@hotmail.com
The document is for study only,if tort to your rights,please inform us,we will delete