Falcon F1000 User Manual

www.rletech.com

13

970.484.6510

C

HAPTER

 0

The F3400/F1000 monitoring system is a comprehensive system which provides additional 

equipment protection by monitoring critical operating parameters in enterprises, remote 

network facilities, communication rooms, remote and unmanned facilities, and critical support 

systems. The F3400/F1000 is a stand alone system. It operates via an embedded Web server 

that handles all data collection, alarm reporting, and multiple concurrent communication 

mediums.

The F3400/F1000 typically monitors analog and dry contact outputs from devices such as 

temperature sensors, humidity sensors, thermistors, gas detectors, smoke detectors, fire 

suppression systems, surveillance products (e.g., IP cameras), leak detection systems, power 

monitoring systems, uninterruptible power supplies (UPSs), power distribution units (PDUs), 

generators, DC power plants, commercial power, HVAC units, ATS and TVSs.

The F3400/F1000 performs internal diagnostics that check the Flash Program code, serial ports, 

RAM, non-volatile RAM, real-time clock, internal power supplies, relay drivers, analog to 

digital converter (ADC), and modem. During operation, the F3400/F1000 monitors its status 

and uses several LED indicators to report its condition.

The F3400/F1000’s embedded firmware enables system configuration, I/O setup, status 

inquiries, alarm reports, data logs, and troubleshooting. The F3400/F1000 is menu driven and 

operates with any Web browser, ASCII terminal or terminal emulation application such as 

HyperTerminal.