Falcon F1000 User Manual

www.rletech.com

55

970.484.6510

4

  Configuration Menu

Figure 4.19 System Configuration

The System link allows users to configure basic F3400/F1000 information. The F3400/F1000's 

IP Address and Point-to-Point Protocol may also be configured through this menu, via the IP 

Configuration Menu link. 

System Name: Appears on the F3400/F1000's Main Menu. The system name is also included 

as part of email and pager notifications.

System Contact: Lists the individual responsible for the F3400/F1000. The System Contact is 

only available through SNMP Gets and is not included in email, pager or SNMP Trap 

notifications.

System Location: Lists the location of the F3400/F1000. It is used to help identify the F3400/

F1000 when viewing the webpages. The System Location is not included in email, pager or 

SNMP Trap notifications.

Web Refresh Rate: The rate at which the F3400/F1000's webpages refresh themselves within 

the Web browser. Only pages that display monitoring points are automatically refreshed (Main 

Menu, Relay Status, View Points, and Modbus Slave pages). The default is 0 seconds 

(disabled), but is typically set for 15 to 20 seconds.

TFTP Server Enable (udp port: 69): This setting opens or closes Port 69 on the LAN 

connection to the F3400/F1000. The TFTP port is used to upgrade firmware and save and load 

configurations. It can be disabled for security reasons and only opened for short periods of time 

during firmware upgrades; see Chapter 8, “Upgrading Firmware and Managing Configuration 

Data” on page 73, for more information. 

Digital Status Color: Allows you to choose the color (green, gold, magenta) displayed on the 

main menu.

Changes will not go into effect until the Submit Changes button is clicked.