Casablanca Fan Company Nouvelle User Manual

Step 2. Route the outlet box wires through the 

1

/

2

″ 

diam-

eter outer hole of the canopy adaptor plate. Attach the
crossbar and canopy adaptor plate to outlet box with screws
provided.

Step 3. With the large washer attached, pass the lag screw
through the center hole of canopy adaptor plate and screw
into guide hole. Tighten until outlet box is firmly mounted
to beam. This box must be firmly secured to the ceiling. We
recommend that the ceiling fixture outlet box be of suffi-
cient capacity enabling it to support the weight of fan and
light fixture under any conditions.

″

Proceed with installation as follows:
Step 1. Remove the knockout plug in the center of the outlet
box or drill a 

1

/

2

″

 hole for the lag screw to pass through. Then

drill a 

1

/

4

″

 guide hole into the joist or beam to a depth of 3

″

.