Audio-Technica SMARTMIXER AT-MX351 User Manual

1. 

External Control connector. For TTL output, plus closure-control input for external  

 

control of each channel.

2. 

Link In/Link Out. Provides for daisy-chaining of multiple mixers when more than four  

 

microphones are used.

3. 

Line/Mic balanced output. Level can be changed via internal switch (see page 10). 

 

XLRM-type connector.

4. 

Unbalanced line-level (–10 dBV) output. RCA jack.

5. 

Aux In. Unbalanced, line-level (–10 dBV), auxiliary input.

6. 

Preamp Outputs. Independent, unbalanced (–10 dBV), switchable pre/post-controller 

 

outputs from mic channels.

7. 

Inputs. Balanced microphone inputs for low-impedance dynamic or condenser mics.  

 

Can be changed to line-level inputs via internal switches (see page 10). XLRF-type  

 

connectors. Can supply 48V phantom power via internal switches.

8. 

Power input. 120V/230V AC, 50/60 Hz. Select input voltage via switch on bottom panel.

Figure 2. Rear panel

External Control

AC In

Link Out

Input 4

Line/Mic

0/-50

Input 3

Input 2

Input 1

Outputs

-10

Link In

Channel

3

1

4

2

Pre-

amp

out

Aux

in

-10