Atmel AVR2070 User Manual

 

8240B-AVR-06/09 

5.  Load J-Link .dll for debugging 

a.  Target -> Connect Segger J-Link 

b.  Should see “DLL WARNING” 

c.  Select Tools -> Targets 

d.  Highlight “Segger J-Link”, right-click and select “Properties” as shown 

in figure D-3-1. 

e.  Find Properties window in lower right corner, make sure properties of 

“Segger J-Link” is selected. 

f. 

Highlight “J-Link DLL File” 

g. 

Locate .dll file from Segger folder (ie. C:/Program 
Files/SEGGER/JLinkARM_V392/JLinkARM.dll) 

h.  Re-do Step A. 

i. 

Verify Device Type Connects to J-Link 

 

6.  To Start debugging 

a.  Debug -> Start Debugging 

The Rowley project file can be launched by opening up the \patch folder and 
navigating to the \Rowley RUM Project File folder containing the .hzp project file. This 
file needs to be copied over the original Rowley project file located in the 
\uTaskerV1.3\Rowley_SAM7X\ folder. Assuming all the project patch procedures and