Athena Technologies A88028 User Manual

10

4.0 COMMISSIONING

The fuel effect components comprise:

(a)

Rear Coal

(b)

Two Side Cheeks

(c)

Coal Bed

(d)

Nine Loose Coals

The Coal Bed and the loose coals are illustrated in Fig. 
7A. The fire is supplied with the rear coal and side 
cheeks already fitted as illustrated in Fig. 7B.

Unpack the pack containing the coal bed and the loose 
coals and check that these are undamaged.

DO NOT INSTALL THE FIRE WITH BROKEN OR 
MISSING COALS. USE ONLY THE COALS SUPPLIED 
WITH THE FIRE.

1.

The underside of the coal bed has grooves 
matching the raised ports of the burner top. Fit the 
coal bed by placing it onto the burner. Take care 
to avoid damage as you insert it past the pilot 
burner (Refer to Fig. 7C). Ensure that it is 
correctly located in the burner tray by sliding it 
sideways and front to back.

2.

Notice that there are five depressions at the front 
of the coal bed and four depressions at the rear 
(as shown in Fig. 7A). Place five loose coals in 
the front recesses with their decorative faces 
forward. Similarly place the remaining four loose 
coals on top of the recesses formed by the front 
loose coals and touching the rear coal (Fig. 7D). 
Ensure that the loose coals are stable and not 
likely to fall off.

Fig. 7A

Fig. 7B