Athena Technologies A88028 User Manual
3
INTRODUCTION
1.0 TECHNICAL DATA
GENERAL INSTALLATION REQUIREMENTS
NO COMPONENT OF THIS FIRE IS MANUFACTURED FROM ASBESTOS OR ASBESTOS RELATED PRODUCTS.
The ATHENA L.F. is an open fronted inset live coal effect gas fire specially designed for Pre-Cast Flue application and is also
suitable for use with Brick Chimneys, twin walled or insulated Metal/Pre-fabricated Flues of 125mm minimum diameter and
Flueboxes conforming to the constructional requirements of BS 715. It is fitted with a combined flame supervision and oxygen
depletion monitoring device. The fire is for hearth mounting only on a non-combustible hearth. The fire is for use on Natural Gas
only.
suitable for use with Brick Chimneys, twin walled or insulated Metal/Pre-fabricated Flues of 125mm minimum diameter and
Flueboxes conforming to the constructional requirements of BS 715. It is fitted with a combined flame supervision and oxygen
depletion monitoring device. The fire is for hearth mounting only on a non-combustible hearth. The fire is for use on Natural Gas
only.
1.1
DIMENSIONS
(Overall)
mm
Height
682
Width
635
Depth
115
Forward Projection
100
Height to top of flue aperture
529
Weight
18 Kg
1.2
INPUTS AND PRESSURES
Maximum Heat Input (Gross)
6.0 kW
20470 Btu/h
Minimum Heat Input (Gross)
2.3 kW
7848 Btu/h
Supply Pressure
20.0 mbar
Setting Pressure Cold
13.0 mbar ± 1mbar
Gas Rate Adjustment
NONE
1.3
BURNER AND CONTROL DETAILS
Main Burner
ÿ 992174
Pilot Burner
SIT OP 9063
Injector (Main Burner)
Bray Cat 82/440
Ignition
Battery Operated Electronic Ignition. Battery Size 9V MN1604 or 6LR61
Control Tap
Concentric (with FSD) Model Number TESA 2762-025
Spark Gap
3.0mm to 5.0mm
Control Knob Settings
OFF, HIGH, MED, ECON, PILOT
In your own interest and that of safety, it is the law that all gas appliances are installed by competent persons in accordance with
the current Gas Safety (Installation and Use) Regulations. Failure to install appliances correctly could lead to prosecution.
the current Gas Safety (Installation and Use) Regulations. Failure to install appliances correctly could lead to prosecution.
The installation MUST be in accordance with these installation instructions, all the relevant parts of the Local and National Building
Regulations or Building Standards (Scotland) (Consolidation) Regulations and the relevant recommendations of the current editions
of the following British Standards:
Regulations or Building Standards (Scotland) (Consolidation) Regulations and the relevant recommendations of the current editions
of the following British Standards:
B.S. 5871 : Part 2
B.S. 5440 : Parts 1 & 2
B.S. 6891
B.S. 6461 : Parts 1 & 2
B.S. 715
B.S. 1251
B.S. 1289 : 1975
B.S. 1289 : Part 1 : 1986
B.S. 1289 : Part 2 : 1989
B.S. 5440 : Parts 1 & 2
B.S. 6891
B.S. 6461 : Parts 1 & 2
B.S. 715
B.S. 1251
B.S. 1289 : 1975
B.S. 1289 : Part 1 : 1986
B.S. 1289 : Part 2 : 1989
Any other relevant British Standard Code of Practice and/or Local Building Regulations and in accordance with the rules in force.