ATD Tools Automobile Accessories ATD-7024 Leaflet

O

PERATING 

I

NSTRUCTIONS 

 

1)  Jack up the car and support on axle stands, then remove the relevant road wheel 
 
2)  Remove the caliper from its carrier and take out the brake pads 
 
3)  Fit the main body of the wind back tool into the caliper; turn the main thrust bolt clockwise to 

compensate for the distance between the piston and the caliper body. 

 
4)  Select the correct adapter and fit it into the end of the main thrust bolt. Continue rotating the 

thrust bolt clockwise until the pegs of the adapter are centered and correctly located into the 
mating recesses in the piston. 

 
5)  Turn the thrust bolt to wind the caliper piston back into the housing. 
 
6)  Fit the new brake pads and bolt the caliper back on to the carrier.