APC AP9810 User Manual
Dry Contact I/O SmartSlot Card
3
Hardware and software requirements and tools needed
The Dry Contact I/O SmartSlot Card works with most APC by Schneider
Electric UPS devices with an output rated less than or equal to 160kVA and an
available SmartSlot.
Electric UPS devices with an output rated less than or equal to 160kVA and an
available SmartSlot.
While most devices meet this requirement; verify the compatibility of your
device by locating it on the APC website, www.apc.com, and checking for
compatible accessories.
device by locating it on the APC website, www.apc.com, and checking for
compatible accessories.
You need the following tools:
•
#1 Phillips screwdriver for screw terminals
•
#2 Phillips screwdriver for SmartSlot screws
•
a wrench of size 1" or 25.4 mm, or adjustable, to tighten the grommet
For the Configuration Utility, you need: Windows (XP, 2003, 2008, Vista, or 7)
and Internet Explorer browser v7 or higher.
and Internet Explorer browser v7 or higher.