Antex electronic XM-100 User Manual

The XM-100 SETUP Mode allows you to configure options such 
as forced tuning, blocking, skipping, etc. 

To enter the SETUP Mode, press and hold the MODE button on 
the front of the unit for 4 seconds or depress the SETUP button 
on the remote. The Setup indicator illuminates, and the menu 
shown below appears.  

 

Setup Menus

 

Mode to Exit

 

 

The top level structure of the menu system is shown below 
and indicates which parameters may be configured. In SETUP 
Mode, the channel up/down buttons on the unit or remote 
control are used to scroll though the menu options. The Mode 
button or Setup button on the remote is used to descend to a 
sub-menu, or to exit up to a higher level. 

At the top level menu heading shown above, pressing the 
Mode button on the unit or remote control exits to normal unit 
operation. You must navigate back to this menu using the 
up/down keys for the Mode button to exit back to normal 
operation of the unit. To help avoid confusion, with few 
exceptions (in sub menus of blocking or skipping), pressing the 
power button on the unit or remote control will exit out of 
Setup Mode and restore normal operation. If you feel stuck in 
a submenu - press the power button to get out.