Alphatronics T-22 eWSB User Manual

32

•  Do not use rechargeable (Ni-Cd) batteries.
•  Do not attempt to recharge, short circuit, disassemble, heat or throw the batteries into the  
 fire.
•   Do not splash the remote control with water or put it on a wet object to avoid possible  

damage. 

•   Do not drop, step on or cause any impact to the remote control unit. This may damage it,

resulting malfunction.

•  Do not mix old and new batteries.
•  If the remote control unit is not going to be used for a long time, remove the batteries.
•  Strong light such as direct sunlight impinging on the remote sensor can cause operational  
  failure. Place the remote control to avoid direct contact with sunlight.

 
5. START UP 
Before using your new LED TV you have to connect it to a suitable power source. For your com-
fort we installed already an extensive channel list for DVB-S/S2. You don´t need to do a channel 
search.
For DVB-T/C we suggest, depending on location, to do an automatic channel search. Therefore, 
please enter main menu and follow the instruction.
If you need more information or a more detailed User manual, please go to our homepage:
www.alphatronics.de

1. Press the CH+ or   button to increase channel number.
2. Press the CH- or   button to decrease channel number. 
You can select the channel number directly by pressing 0 to 9 buttons three times.

After selecting the digit button, the digit will be memorized. You can return to the previously 
selected programm by pressing  .

You can select the input source by pressing the SOURCE button on the top of the panel or press 
the SOURCE button on the remote control. Then press enter or the   to confirm.