Advent CCS562 User Manual

5 

    

1.  Choose the mounting location for the CAM150 commercial camera on 

the rear of the vehicle. We recommend a position as high as possible 
and in the center of the vehicle.  

2.  Choose a suitable place in the vehicle cabin to mount the 5.6” LCD 

Screen. We recommend dash mounting in the corner of the vehicle. 

3.  Examine the vehicle to determine the best way to run the power wires 

to: LCD monitor, accessory power, the reverse lights and to the camera 
at the rear of the vehicle.   

4.  Attach the screen to the dash using the supplied 3M adhesive pad or 

mounting screws. The mounting bracket has been designed to be bent 
to match the shape of the mounting location. 

5.  Attach the camera to the rear of the vehicle using the supplied 

mounting screws of bolts. 

6.  Run the extension cable from the camera to the front of the vehicle.  
7.  Run the wiring harness from the LCD monitor and connect up with the 

Camera extension cable. 

8.  Attach reverse & accessory power wires. 
9.  Connect your reversing camera. 
 
Note: When using an Advent CCS System, the signal and power for the 
camera will be supplied through the monitor extension cable. Please also 
note that the microphone in the camera will be played on the speaker built 
into the LCD monitor. 
 
10.  Connect the LCD Monitor to the harness. 
11.  Power up and adjust on screen settings. 
 
NOTE: To adjust monitor and volume  settings