Adder Technology 5000 User Manual
Power in connection
The AdderView CATxIP 5000 unit is powered
by the supplied 5V power adapter. There is no
on/off switch on the unit, so operation begins
as soon as a power adapter is connected.
by the supplied 5V power adapter. There is no
on/off switch on the unit, so operation begins
as soon as a power adapter is connected.
2 Connect the IEC connector of the supplied country-specific power lead to
the socket of the power adapter.
3 Connect the power lead to a nearby main supply socket.
Note: Both the AdderView CATxIP 5000 and its power supply generate heat
when in operation and will become warm to the touch. Do not enclose them
or place them in locations where air cannot circulate to cool the equipment.
Do not operate the equipment in ambient temperatures exceeding 40 degrees
Centigrade. Do not place the products in contact with equipment whose surface
temperature exceeds 40 degrees Centigrade.
when in operation and will become warm to the touch. Do not enclose them
or place them in locations where air cannot circulate to cool the equipment.
Do not operate the equipment in ambient temperatures exceeding 40 degrees
Centigrade. Do not place the products in contact with equipment whose surface
temperature exceeds 40 degrees Centigrade.
AdderView CATxIP
000 rear panel
output lead from
power adapter
POWER
IN
To connect the power supply
1 Attach the output lead from the power adapter to the
5V
socket on the rear
panel of the AdderView CATxIP 5000.
5V
4.0A
12
1
16
1
OPTIONS
COMPUT