Accusplit Electronic Viewfinder HDVF-C30W User Manual
3(E)
Location and Function of Parts
Viewfinder cable
1
Plug
Connect to the VF connector on the camera.
2
Stopper
Prevents the viewfinder from coming off the camera
when it is slid from side to side.
when it is slid from side to side.
3
Tally indicator (front)
Lights up when the camera receives a tally control
signal. Set the TALLY switch on the front panel (see
page 4 (E)) to OFF when not in use. The brightness
can also be adjusted with the TALLY switch.
signal. Set the TALLY switch on the front panel (see
page 4 (E)) to OFF when not in use. The brightness
can also be adjusted with the TALLY switch.
4
Tally indicator (rear)
Lights up when the camera receives a tally control
signal. This indicator can be covered when not in use.
signal. This indicator can be covered when not in use.
5
Eyecup
Blocks external light while you are shooting.
Over time the eyecup may become cracked. If this
occurs, it should be exchanged.
Sony part number: 3-776-341-01
Over time the eyecup may become cracked. If this
occurs, it should be exchanged.
Sony part number: 3-776-341-01
6
Diopter adjustment ring
Turn this until the image is sharpest for your eyesight.
1
Plug
2
Stopper
3
Tally indicator (front)
4
Tally indicator (rear)
5
Eyecup
6
Diopter adjustment
ring
Viewfinder barrel
Front panel
(see page 4(E))
Side panel
(see page 6(E))
Bottom panel
(see page 7(E))