Ditch Witch Welder PR95 User Manual
PR95 Operator’s
Manual
Service - 67
10 Hour
CMW
Check Engine Coolant Level
Check coolant level, with engine cool, every 10
hours. Maintain coolant level at 1” (25 mm) below
bottom of radiator cap. If low, add approved
coolant.
hours. Maintain coolant level at 1” (25 mm) below
bottom of radiator cap. If low, add approved
coolant.
Check Hydraulic Fluid Level
Check hydraulic fluid level every 10 hours.
Maintain fluid level at halfway point on upper sight
glass (1), when engine is off and fluid is cool. Add
THF at hydraulic fluid fill (2).
Maintain fluid level at halfway point on upper sight
glass (1), when engine is off and fluid is cool. Add
THF at hydraulic fluid fill (2).
IMPORTANT: See “Approved Coolant” on
page 63 for information on approved coolants.
page 63 for information on approved coolants.