Digimerge DGRT400 User Manual

USING THE CLIENT SOFTWARE 

24 

quality settings. The image size increases exponentially with higher quality, and can greatly 
lengthen transmission. 
 
Enable image window auto resize check box lets you disable the rearrangement of image 
windows inside of a main window, so you can apply your own position and size of image 
manually. These settings will be saved. 
  
Always display snapshots in its actual size (window resize) check box lets you disable resize 
and center position of snapshot windows, so one can apply your position and size of snapshot 
window manually.  These settings will be saved. 
 
Skin selection drop down menu allows different graphic user interface representation. 
 

 
DVS has the ability to automatically call the client PC if motion is detected in the monitored 
area, or if an alarm is set.  This is known as a callback function.  
 
DVS will access the client PC after the detection of motion or triggering signals from the alarm 
sensors, after which it will start transmitting images.  The phone number to be dialed and the 
required actions after the motion or sensors detection are defined in the Callback Properties 
dialog shown in Figure 8. You need to type in the Callback phone number (be sure that you 
have selected correct Tone Dial or Pulse Dial mode), select the folder for saving images in 
Save callback images to field, specify the number of sequential callback attempts (up to 5), 
time interval between dialing series, and select a Sound beep, if desired, to receive sound 
notification on Callback.  If you wish to proceed with Callback mode after successful callback 
attempt, check Auto proceed callback mode after callback event checkbox. Please refer to the 
section 5.9 on page 41 for further details on the callback function.