Digimerge DGRT400 User Manual
USING THE CLIENT SOFTWARE
Digimerge Dialup Video Server User’s Guide
31
5.4 Relays and sensors control
Pressing the
(Relays and sensors) button brings up the relay/sensors window shown in
Figure 12.
DVS can generate up to 4 relay output signals. You can turn relays on or off by pressing the
Relay Out buttons. Do this, set-up the initial relay states.
For sensors, a red color means an alarm state. Press any sensor button to bring up the dialog for
configuring the alarm sensors (shown in Figure 9 on page 26).
DVS can generate up to 4 relay output signals. You can turn relays on or off by pressing the
Relay Out buttons. Do this, set-up the initial relay states.
For sensors, a red color means an alarm state. Press any sensor button to bring up the dialog for
configuring the alarm sensors (shown in Figure 9 on page 26).
Figure 12 Relays/sensors control window
After pressing the Break connection and switch to callback mode button, the DVS will go to
Callback mode. Please refer to the section 5.9 for the details on the callback function.
Callback mode. Please refer to the section 5.9 for the details on the callback function.
Sensor 0 (initial state)
Relay control button (ON state)
Relay control button (OFF state)
Sensor 2 (alarm state)
Break connection and switch to callback mode