Desa HD-9260 User Manual

-13-

598-1007-02

If you have a problem, please follow this guide. You may also want to visit our Web site at: www.desatech.com. For
more help call 1-800-858-8501 8:00 AM to 4:30 PM Central Time weekdays.

 Lo sentimos, pero no podemos contestar preguntas en español por teléfono.

1. Light switch is turned off.
2. Flood light is loose or burned out.
3. Fuse is blown or circuit breaker is

turned off.

4. Daylight turnoff is in effect. 

(Re-

check after dark)

.

5. Incorrect circuit wiring, if this is a

new installation.

6. Re-aim the sensor to cover de-

sired area.

1. Control may be installed in a rela-

tively dark location.

2. Control is in Test. 

(Set control

switch to an ON-TIME position)

.

1. Control may be sensing small ani-

mals or automobile traffic. 

(Re-

aim sensor or use lens shield)

.

2. Sensitivity is set too high. 

(Reduce

sensitivity. Turn Range Boost off)

.

1. Heat or light from the lamps may be

turning the Light Control on and off.
(Aim lamps away from the sensor. Turn
Boost off).

2. Reflected heat from other objects are

triggering the sensor. (

Re-aim sensor.

Turn Boost off).

3. Control is in warming up. 

(Flashing is

normal under these conditions. Wait 1
minute for sensor to warm up).

4. Control is in Test. 

(Set control switch to

an ON-TIME position).

1. A lamp is positioned too close to the

sensor or pointed at objects that causes
the sensor to trigger. 

(Aim the lamp

away from the sensor or objects).

2. Control is pointed at a heat source like

an air vent, dryer vent, or brightly-painted
heat-reflective surface. 

(Re-aim sen-

sor. Turn Boost off).