LG E2251S-BN Owner's Manual

 

y

Disconnect the power cord first before 
moving or installing the Monitor set. 
Otherwise electric shock may occur.

 

y

If you install the Monitor set on a ceiling or 
slanted wall, it may fall and result in severe 
injury. 

 

y

Use only an authorized LG wall mount and 
contact a local dealer or qualified personnel.

 

y

Do not over tighten the screws as this may 
cause damage to the Monitor set and void 
your warranty. 

 

y

Use only screws and wall mounts that 
meet the VESA standard. Any damages 
or injuries by misuse or using an improper 
accessory are not covered by the warranty.

 

y

Only use screws that are listed on the VESA 
standard screw specifications.

 

y

The wall mount kit will include an installation 
manual and necessary parts.

 

y

The wall mount bracket is optional. You can 
obtain additional accessories from your local 
dealer.

 

y

The length of screws may differ depending 
on the wall mount. Be sure to use the proper 
length.

 

y

For more information, refer to the 
instructions supplied with the wall mount.

E1951S

E2051S
E2251S

E1951T

E2051T
E2251T

E2351T

E2251VR
E2351VR

E2251VQ
E2351VQ

75  x 75

M4

4

RW120

If you intend to mount the Monitor set to a wall, an 
optional third-party wall mount must be purchased.
When you install the Monitor set using the wall 
mounting interface (optional parts), attach it 
carefully so it will not fall.

1

  Please use screws and a wall mount interface 

in accordance with VESA Standards. 

2

  If you use screws longer than standard, the 

monitor might be damaged internally. 

3

  If you use improper screws, the product might be 

damaged and drop from mounted position.  In 
this case, LG Electronics is not responsible for it. 

4

  VESA compatible only with respect to screw 

mounting interface dimensions and mounting 
screw specifications.

5

  Please use a VESA standard as below.

 

y

784.8 mm (30.9 inch) and under

* Wall Mount Pad Thickness : 2.6 mm
* Screw : Φ 4.0 mm x Pitch 0.7 mm x 

                Length 10 mm

 

y

787.4 mm (31.0 inch) and above

* Please use VESA standard wall mount pad 

and screws.

 

y

VESA (A x B)