LG Security Camera LRN3040N Series User Manual
30
Installation
3
Ins
talla
talla
tion
NOTE
• If you register the IP camera for plug and connect, [HTTP Port]
and [RTSP Port] number per each channel are assigned as
below.
below.
CH
HTTP Port
RTSP Port
1
1080
1554
2
2080
2554
3
3080
3554
4
4080
4554
• If you connect the IP Camera which uses PoE for Plug and
Connect port, it takes 2 or 3 minutes. Wait a moment.
• The information of IP camera for Plug and Connect port is not
initialized if you use the [Factory Default] function.
• The IP camera for Plug and Connect port cannot be registered
to the system doubly.
Storage
• Overwrite: Sets whether you use Overwrighting function.
• Full Warning: When the HDD has overflowed a warning message
• Full Warning: When the HDD has overflowed a warning message
is displayed.
• Auto Delete: Sets the auto delete date. If you set the auto delete
date, the recorded data will be deleted except the data within
the selected date period of time. The Auto Delete function is
activated every 35 minutes.
the selected date period of time. The Auto Delete function is
activated every 35 minutes.
• Storage Saving : Saves the storage space by reducing the quality
of the recorded data.
• Format: Initializes the HDD (Hard Disk Drive). All data on the
HDD will be erased.
• E-SATA : Selects the E-SATA device.
• Insert: Uses the selected E-SATA storage for recording data.
• Eject: Uses the selected E-SATA storage for data back-up.
• Insert: Uses the selected E-SATA storage for recording data.
• Eject: Uses the selected E-SATA storage for data back-up.
Display settings
OSD
• Channel Name: Mark up to display or remove the channel name
in the channel window.
• Channel Status: Mark up to display or remove the channel status
in the channel window.
• Channel FPS: Mark up to displays or removes the channel FPS
(Frame Per Seconds) in the channel window.
• Font Size: Selects the font size of characters such as the channel
name and playback time which displayed on the channel
window.
window.
• Position: Selects the position of characters such as the channel
name and playback time which displayed on the channel
window.
window.
Sequence
You can view all the channels in sequence in the selected screen
division mode. You cannot use sequence mode with the 4 split.
• Main Dwell Time: Selects the channel sequence time for main
division mode. You cannot use sequence mode with the 4 split.
• Main Dwell Time: Selects the channel sequence time for main
monitor.