LG Security Camera LRN3040N Series User Manual
Installation
35
3
Ins
talla
talla
tion
• Trap Community String: Specifies the SNMP trap community in
which you want to enable this system (e.g. lgecommunity or
public).
public).
Output
• Relay Off
- ALARM ACKNOWLEDGE: Use the ALM.OFF button to stop
alarm.
- POST-ALARM TIME: The alarm is stopped after post-alarm
time.
• System Alarm Out: Outputs the alarm (relay) signal via the
selected alarm out terminal number when the system has some
problem. If you do not use this function, select [NONE] option.
problem. If you do not use this function, select [NONE] option.
• HDD Fail Alarm Out: Outputs the alarm (relay) signal via the
selected alarm out terminal number when the HDD is failed. If
you do not use this function, select [NONE] option.
you do not use this function, select [NONE] option.
Buzzer
Marks up when you want to activate the selected option.
• Sensor: Makes a sound when a sensor occurs.
• Motion : Makes a sound when a motion is detected.
• System: Makes a sound when the HDD has a bad sector.
• Motion : Makes a sound when a motion is detected.
• System: Makes a sound when the HDD has a bad sector.
NOTE
• Data cannot be saved in HDD which is occurred bad sector.
• When HDD has bad hold, can jot operate normally. Replace
• When HDD has bad hold, can jot operate normally. Replace
the HDD immediately .
User settings
Group Authority
You can register a new user group with various access rights.
• Group ID: Select the group ID to assign authority.
- GUEST: The GUEST group has the limited authority of the
system. Users in this group are available to see the live
image and to set the covert function of the channel.
image and to set the covert function of the channel.
- ADMINISTRATOR: The ADMINISTRATOR group has the
unlimited authority of the system. Users in this group are
available to use all of the functions.
available to use all of the functions.
- [Group 01] to [Group 08]: Users in this group are available to
set the authority of the function manually.
NOTE
The GUEST and ADMINISTRATOR group are set initially for the
authority. You cannot change the initial settings and group name
(GUEST and ADMINISTRATOR).
authority. You cannot change the initial settings and group name
(GUEST and ADMINISTRATOR).
• Group Name: If you select one of the group numbers from the
Group ID option, you can register the group name. Enter the
group name.
group name.
- Setup, Search/Play, Export, PTZ, Power Off, Instant Record:
Set the authority for the selected group. Mark up the option
to activate it.
to activate it.
• Main Channel: Selects the channel to allow the operation for the
group user. The LG logo is displayed on the covert channel(s).