Bosch Appliances Oven HBA36B6.0W User Manual

Turn the rotary selector to select the required basic setting

Press the

button.

Change the basic setting by turning the rotary selector.

You can now change other basic settings, as described in

points 2 to 4.

Press and hold the

button until the clock appears. This

takes about four seconds. All changes are saved.

Cancelling
Press the

button. The changes are not applied.

Automatic switch-off

Your oven has an automatic switch-off function. It is activated if

no cooking time is set and the settings have not been changed

for a long time. The point at which this occurs depends on the

temperature or grill setting that has been set.
Switch-off activated

”‰

appears in the display. Operation is interrupted.

Press any button to make the display message go out. You can

make new settings.

Note: If a cooking time is set, the oven stops heating once the

cooking time has elapsed. The automatic switch-off function is

not necessary.

Cleaning system

The cleaning system regenerates the self-cleaning surfaces in

the cooking compartment.
The self-cleaning surfaces are coated with a highly porous

ceramic layer. This coating absorbs and disintegrates splashes

from baking and roasting while the oven is in operation. If the

surfaces no longer clean sufficiently and dark stains appear,

they can be regenerated with the cleaning system.
Retrofitting the self-cleaning ceiling and side walls

The back wall in the cooking compartment is coated with

ceramic. In order for you to be able to use the cleaning system,

the ceiling and side walls must also be coated. You can obtain

the self-cleaning ceiling and side walls as a special accessory

from the after-sales service.
Changing the basic settings

When you have retrofitted the self-cleaning ceiling and side

walls, you must activate the cleaning system in the basic

settings. To find out how to do this, refer to the Basic settings

section.
Cleaning levels

You can choose from three cleaning levels.

Before cleaning

Remove accessories and cookware from the cooking

compartment.

Cleaning the cooking compartment floor
Before you set the cleaning system, clean the surfaces in the

cooking compartment that are not self-cleaning. Otherwise,

stains will develop that it is not possible to remove.

Use a dish cloth and hot soapy water or a vinegar solution. If

there are heavy deposits of dirt, use a stainless steel scouring

pad or oven cleaner. Only use when the cooking compartment

is cold. Never treat the self-cleaning surfaces with a scouring

pad or oven cleaner.

Setting the cleaning level

Press the

button.

Cleaning level 3 is suggested. You can start the cleaning

process immediately with the

button.

If you wish to change the cleaning level:

Select the desired cleaning level using the rotary selector.

Press the

button to start the cleaning operation.

The time counts down.

Once cleaning has finished
The oven stops heating.

‹‹

appears in the display.

Cancelling the setting
Press and hold the

button until

3D hot air, 160 °C

appears. You can make new settings.

Adjusting the cleaning level
Once cleaning starts, the cleaning level can no longer be

changed.

Setting cleaning to run overnight
So that you can use your oven throughout the day, delay the

end of the cleaning process to during the night. See the Time-

setting options section, setting a later end time.

After cleaning

When the cooking compartment has cooled down completely,

wipe the salt residues off the self-cleaning surfaces with a

damp cloth.

Level

Degree of cleaning

Duration

gentle

approx. 45 minutes

moderate

approx. 1 hour

intensive

approx. 1 hour, 15 minutes