Bosch Gas Ranges User Manual

Getting Started

English 9

Note: The full extension rack must be in the closed position when removing and 
replacing. Grasp the entire rack (both sections).

1. Grasp the bottom section and pull straight out. 
2. Once the stop is reached, grasp the top section and pull straight out until the 

second stop is reached. If the top rack will not extend fully, it is not installed 
correctly. Reinstall it so that the pan stop is in the back of the oven.

The two sections of the rack are designed to come apart for easier cleaning. 

1. Place rack on flat surface in the closed position top side up. 
2. Rotate one side of top rack towards you until it is past the stop (ball). 
3. Pull the rack up and out, rotated side first. 

Always verify that top rack is installed correctly after reassembly. The 
back edges of the top rack must be under the rack guide on the bottom 
rack. DO NOT simply rest the top rack on top of the bottom one.

1. To reassemble rack, hold top rack diagonally across bottom rack. 
2. Insert one side of top rack to closed position. 
3. Rotate the other side toward the back of the rack until it passes the stop (ball). 
4. Push top rack the rest of the way in (See Figure 3).

Stop (Ball)

Stop (Ball)