Bosch Gas Ranges User Manual

English 17

is clean and dry. If the burner still fails to ignite, see “Cooktop Troubleshooting 
Chart” on page 38

Caution: All ignitors spark when any single burner is turned on. Do not 
touch any of the burners when the cooktop is in use.

Cooktop burners can be lit manually during a power failure. Hold a match at the 
port and turn the knob to the HI position. Wait until the flame is burning all the way 
around the burner before adjusting the flame to the desired

 

setting.

After lighting, turn the knob counterclockwise to the desired flame size. See 
“Cooking Guide” on page 23 for recommended burner settings.

Caution: To prevent possible burns or possible damage to the pan or the appli-
ance, the flame should not extend beyond the edge of the pan.

Turn knob clockwise to the OFF position.

Note: an “pop” may be heard when the burner is turned off. The “pop” may be 
louder with LP gas than with natural gas. This is normal.

This section explains how to operate the oven. See “Getting the Most Out of Your 
Oven” on page 24 for guidelines to improve oven results.

Do not use aluminum foil or protective liners to line any part of an appli-
ance, especially surface unit drip bowls or oven bottom. Installation of 
these liners may result in a risk of electric shock or fire.

Note: To back out of a current mode, press OFF. (Selecting OFF when not setting 
the cooking mode will turn the oven off.)

1. Press COOKING MODE.
2. BAKE will flash in the display.
3. If no change is made within 5 seconds, 

control will beep and flash. If this occurs, 
press START.

4. To change the cooking mode, turn knob.
5. Press START.
6. The selected mode will appear in the display, along with the default tempera-

ture for that mode, which will be blinking.

7. To select a different temperature, turn knob to the right or left (in 5° incre-

ments) to desired temperature.

8. Press START. If not pressed, oven automatically turns on in 5 seconds.