Bosch 8-Dec User Manual

464 | DSRF Premises Wireless | Bosch DSRF Receivers

▶ Compatible with the DS7400XiV4 panels
▶ Receives low battery, tamper, and sensor status

▶ LED indicates receiver status
▶ Cover and wall tamper
▶ System allows two receivers for larger area coverage
▶ 2-hour or 12-hour transmitter and detector supervision

The RF3222E RF Receiver allows the multiplex bus of the
DS7400XiV4 Control Panels to receive RF signals from up
to 112 wireless devices. The RF3222E supports up to eight
keypads and 112 keyfobs or input sensors.
Tamper, jam detection, and sensor missing status reports
provide reassurance that the system works correctly.
The RF3222E receives at 433.42 MHz.

Europe

CE

1999/5/EC, EN60950: 1993 +A1 +A2
+A3 +A4, EN300220-1: 1997,
EN300683: 1997
1999/5/EC, EN60950 1992 (2nd edition)
+A1 (1993) +A2 (1993) +A3 (1995) +A4
(1997), EN55022-1 Class B (1999),
EN55024 (1998), EN50130-4 (1995)
+A1 (1998) +A2 (2003), EN61000-4-2
(1995), EN61000-4-3 (1997),
EN61000-4-4 (1995), EN61000-4-5
(1995), EN61000-4-6 (1997),
EN61000-4-8 (1994), EN61000-4-11
(1994), EN301489-3 (2000),
ETS300683 (1997), EN300222-1
(1997-99), EN300220-3 (1997-99)

Compatible Products
The following products are compatible with the RF3222E
Receiver:

Detectors

RF280ETHS

Wireless smoke detector

RF835E

Wireless TriTech® detector

RF940E

Wireless PIR detector

RF1100E

Wireless glass-break detector

RF3401E

Wireless point transmitter

Keypads

RF3332E

Two-button key fob

and fobs

RF3334E

Four-button key fob

A DS7430 or DS7436 Multiplex Module is
needed to connect the RF3222E Receiver to a
DS7400XiV4 Control Panel.

The wire length between the receiver and the control panel
should not exceed 300 m. Use solid wire with a minimum
diameter of 0.8 mm or stranded wire with a minimum
diameter of 1.0 mm. Shielded cable is not recommended.

Do not use twisted pair wire.

1

RF3222E Receiver

2

433.42 MHz antennas

1

Hardware pack

1

Literature pack