Blaupunkt TRAVELPILOT LUCCA 3.3 EE User Manual
33
Basic settings
The Settings menu can be used to change
the Lucca’s settings and to view product
information.
the Lucca’s settings and to view product
information.
Press on the
Info … button to view
additional information on the Lucca’s
software.
software.
General settings
Press the Navigation button.
The Navigation menu opens.
The Navigation menu opens.
Press the Settings button.
The Settings menu opens.
The Settings menu opens.
Press the General Settings
button.
The
button.
The
General Settings menu
opens.
Activating / deactivating night mode
The General Settings menu can be used to
manually select day/night mode. The Map
Settings menu can be used to select the
colour settings. (Chap. “Using map view
during route guidance”, “Activate additional
map information”)
The General Settings menu can be used to
manually select day/night mode. The Map
Settings menu can be used to select the
colour settings. (Chap. “Using map view
during route guidance”, “Activate additional
map information”)
Press the Night Mode button in the
General Settings menu to activate (tick)
or deactivate (no tick) night mode.
General Settings menu to activate (tick)
or deactivate (no tick) night mode.
Activate/deactivate night view
You can activate/deactivate automatic
day/night changeover mode in the General
Settings menu.
You can activate/deactivate automatic
day/night changeover mode in the General
Settings menu.
When activated, Lucca receives information
on the exact time at your current position via
GPS and uses this information to calculate
sunrise and sunset, at which times it will
automatically switch to day/night mode.
on the exact time at your current position via
GPS and uses this information to calculate
sunrise and sunset, at which times it will
automatically switch to day/night mode.
Press the Automatic Night Colours
button in the General Settings menu to
activate (tick) or deactivate (no tick)
automatic changeover mode.
button in the General Settings menu to
activate (tick) or deactivate (no tick)
automatic changeover mode.
➜
➜
➜
➜
➜
➜
Selecting your time zone
You can select the time zone for your current
position in the Time Zone menu.
You can select the time zone for your current
position in the Time Zone menu.
Lucca is only able to display the correct
arrival time during route guidance and
switch the screen to day/night mode if it is
set to the correct time zone.
arrival time during route guidance and
switch the screen to day/night mode if it is
set to the correct time zone.
Please read the chapter “Navigation”, section
“Basic settings” for more information.
“Basic settings” for more information.
Entering your home address
Entering your home address into the Lucca
will enable you to navigate home easily and
comfortably no matter where you are.
Please read the “Basic Settings” section in
the “Navigation” chapter.
Entering your home address into the Lucca
will enable you to navigate home easily and
comfortably no matter where you are.
Please read the “Basic Settings” section in
the “Navigation” chapter.
Speed limit warning options
You can use the Speed Warning Options
menu to select whether you would like to be
warned by an audio alert when exceeding
speed limits.
You can also use this menu to specify a
speed limit tolerance value. In this event,
you will only be warned once the tolerance
value has been exceeded as opposed to the
actual speed limit.
You can use the Speed Warning Options
menu to select whether you would like to be
warned by an audio alert when exceeding
speed limits.
You can also use this menu to specify a
speed limit tolerance value. In this event,
you will only be warned once the tolerance
value has been exceeded as opposed to the
actual speed limit.
Press Alerts in the General Settings
menu.
The Speed Warning Options menu opens.
menu.
The Speed Warning Options menu opens.
Press on Warn When Speeding to
activate (tick) or deactivate (no tick) the
audio alert.
Slide the Speeding Tolerance button
along the bar to select the tolerance
value.
activate (tick) or deactivate (no tick) the
audio alert.
Slide the Speeding Tolerance button
along the bar to select the tolerance
value.
➜
➜
➜
Basic settings
Lucca3_3RU_long_GB.indd 33
Lucca3_3RU_long_GB.indd 33
11.07.2007 16:51:12 Uhr
11.07.2007 16:51:12 Uhr