Blaupunkt porto SILVERSTONE C34 User Manual
ENGLISH
E-1
Precautions
This equipment has been tested and found to comply with the
limits for a Class B device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable pro-
tection against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio
frequency energy, and, if not installed and used in accord-
ance with instructions, may cause harmful interference with
radio communications. However, there is no guarantee that
radio interference will not occur in particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to consult the
dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not ex-
pressly approved in this manual could void your authority to
operate this equipment.
limits for a Class B device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable pro-
tection against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio
frequency energy, and, if not installed and used in accord-
ance with instructions, may cause harmful interference with
radio communications. However, there is no guarantee that
radio interference will not occur in particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to consult the
dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not ex-
pressly approved in this manual could void your authority to
operate this equipment.
Features
• Detachable front panel
• Built-in power amplifier
(max. output : 45W X 4ch)
• FM/MW PLL Synthesizer tuner
• 30 Station preset memory
• Travel Store / Scan tuning
• Telephone mute
• CD changer control
• Auxiliary input
FCC WARNING
• Avoid installing the unit where it would be subject to high
temperatures, such as in direct sunlight or a hot air stream
from the heater, or where it would be subject to dust, dirt, or
excessive vibration.
from the heater, or where it would be subject to dust, dirt, or
excessive vibration.
• Do not turn on the unit if the temperature inside the car is
very high. Always cool down the unit before usage. Parking
your car in direct sunlight will result in a temperature rise.
your car in direct sunlight will result in a temperature rise.
• If the unit does not turn on, check the connections first. Then
check whether the fuse at the back of the unit is blown.
• Carefully read this manual before using the unit. If you en-
counter any problems that are not covered in this manual,
please consult the dealer where you purchased the unit or
the dealer nearest to you.
please consult the dealer where you purchased the unit or
the dealer nearest to you.
Handling Cassettes
• Do not keep a cassette in the unit when not in use.
• Do not expose cassettes to direct sunlight, extremely low
• Do not expose cassettes to direct sunlight, extremely low
temperatures, or moisture.
• Do not insert a cassette that appears to be broken, twisted,
dirty or with loose or torn labels on it.
• Usage of cassettes longer than 90 minutes is not recom-
mended since their tapes are very thin and tend to be
stretched. Frequent playing back and stopping of these
cassette can cause them to be pulled into the cassette deck
mechanism.
stretched. Frequent playing back and stopping of these
cassette can cause them to be pulled into the cassette deck
mechanism.
• Before inserting a cassette into the unit, make sure that the
tape is not slack. If it is, turn the reel hub with a pencil or
similar tool to rewind tightly, as shown below.
similar tool to rewind tightly, as shown below.
Handling the Front Panel
Attaching the Front Panel
Place the right hand side of the front panel so that the parts
A
of the front panel are engaged with the parts
B
of the unit
as shown below. Then push the left hand side of the front
panel until it is securely locked.
panel until it is securely locked.
Detaching the Front Panel
Remove the Tape from the unit, if any, and turn off the power
of the unit.
Press the
of the unit.
Press the
to unlock the front panel from the unit. Grasp
the front panel as shown below and remove it from the unit.
Security
To avoid theft or loss of the front panel, you can inactivate
the release button
the release button
by installing the screw provided.
1.
Unscrew the bolt marked
✼
at the left front side of the
unit. (See diagram above)
2.
Attach the front panel.
3.
Select a locking screw from the mounting hardware (See
page 8) and screw it into the same hole to fasten the front
panel.
panel.
Notes
• Do not press hard on the front panel when affixing it to the
unit. No more than light to moderate pressure should be
needed.
needed.
• Make sure there is no dust or dirt on the electrical terminals
on the back of the front panel as this could cause intermitent
operation or other malfunctions.
operation or other malfunctions.
01-CC2_SILVERSTONE(Eng)_body
04.4.11, 2:27 PM
1