Blaupunkt NEW YORK 800 User Manual
6
Scope of delivery
The scope of delivery includes:
•
New York 800
•
Remote control (incl. battery)
•
TMC Tuner (for 1 011 103 800/802 only)
•
MicroSD card with navigation data in the MicroSD
card slot (only for devices with navigation)
card slot (only for devices with navigation)
•
GPS antenna
•
External Bluetooth microphone
•
Getting started
•
Support frame
•
Small parts set
•
Installation material
•
Connecting cable
Placing the device in operation
Caution!
Transport securing screws
Ensure that the transport securing screws are removed
before the startup of the device.
before the startup of the device.
Switching on/off
Switching on/off with the rotary/pushbutton
쏅 For switch-on, press the rotary/pushbutton
5
.
쏅 For switch-off , hold the rotary/pushbutton
5
pressed for more than 2 seconds.
Switching on/off via vehicle ignition
If the car sound system is connected with the vehicle
ignition and it was switched off with the rotary/pushbut-
ton
If the car sound system is connected with the vehicle
ignition and it was switched off with the rotary/pushbut-
ton
5
, it is switched on or off with the ignition.
Volume
Adjusting the volume
You can adjust the volume in steps from 0 (off ) to 50
(maximum).
You can adjust the volume in steps from 0 (off ) to 50
(maximum).
쏅 Turn the rotary/pushbutton
5
to change the vol-
ume.
Muting the car sound system (Mute)
쏅 Briefl y press the rotary/pushbutton
5
to mute the
device or to reactivate the previous volume.
Main menu
In the main menu, you press the buttons on the touch-
screen to call up the diff erent sources and operating
modes.
screen to call up the diff erent sources and operating
modes.
쏅 Press the MENU button
2
.
The main menu is displayed.
As long as you do not select a new audio source, the
last active audio source is played back.
last active audio source is played back.
Note:
The fi gures used in these instructions are intended
to facilitate the explanations and details may deviate
from your device.
The fi gures used in these instructions are intended
to facilitate the explanations and details may deviate
from your device.
Radio mode
Start radio mode
쏅 In the main menu, press the Radio button.
The radio menu is displayed.
Select memory bank
Diff erent memory banks and wavebands are available.
Up to 6 stations can be stored in each memory bank.
Up to 6 stations can be stored in each memory bank.
쏅 Press the [ ] button repeatedly until the desired
memory bank is displayed.
Tuning into a station
Tuning into stations manually
쏅 Briefl y press the [ ] or [ ] button once or sev-
eral times to change the frequency in increments.
Scope of delivery | Startup | Radio mode