Blaupunkt GRENOBLE RD 169 User Manual
40
CLK. 12/24
Switches between 12-h and
24-h clock display.
24-h clock display.
DISP.
ON/OFF. Here you can set
the clock to permanent dis-
play when the audio system
is switched off. The clock
display will remain visible
until the ignition is switched
off.
the clock to permanent dis-
play when the audio system
is switched off. The clock
display will remain visible
until the ignition is switched
off.
EQ ON/OFF Switches the equalizer
functions on and off.
HICUT
Reduces interference under
poor reception conditions by
cutting the treble.
Select “NO HI-CUT” or
“HI-CUT 1, 2 or 3”.
3 = cuts the treble the most.
poor reception conditions by
cutting the treble.
Select “NO HI-CUT” or
“HI-CUT 1, 2 or 3”.
3 = cuts the treble the most.
LO-DX
Adjusts seek tuning sensiti-
vity.
“LO” stands for local recepti-
on.
“DX” stands for distant re-
ception.
Select “LO 3” if you want to
receive strong stations in
the local area, select “DX 1”
if you want to tune into wea-
ker stations which are furt-
her away.
vity.
“LO” stands for local recepti-
on.
“DX” stands for distant re-
ception.
Select “LO 3” if you want to
receive strong stations in
the local area, select “DX 1”
if you want to tune into wea-
ker stations which are furt-
her away.
LOUDNESS Loudness boosts the bass
frequencies at low volume.
LOUD 1 - Low boost
LOUD 6 - Max. boost
LOUD 1 - Low boost
LOUD 6 - Max. boost
MUTE
It is possible to lower the au-
dio volume quickly at the
touch of a button. Here you
can program the volume to
which the audio will drop.
dio volume quickly at the
touch of a button. Here you
can program the volume to
which the audio will drop.
PEAK
PEAK ON: Displays the dy-
namics of the music signal.
PEAK OFF: Permanent dis-
play for the volume
namics of the music signal.
PEAK OFF: Permanent dis-
play for the volume
PTY LANG
Allows you to select bet-
ween German and English
for the display of the pro-
gramme types.
ween German and English
for the display of the pro-
gramme types.
REG
To listen to a regional radio
programme outside of its
RDS transmission range,
switch on “REG ON”.
For full RDS service, switch
to “REG OFF”.
programme outside of its
RDS transmission range,
switch on “REG ON”.
For full RDS service, switch
to “REG OFF”.
SCANTIME
Use this function to set the
scan time for the radio or
CD player from 5 to 20 se-
conds.
scan time for the radio or
CD player from 5 to 20 se-
conds.
STEREO
/MONO
/MONO
Switches between stereo
and mono manually. The
mode selected will appear
briefly in the display. The
car audio system will select
“STEREO” playback auto-
matically each time it is swit-
ched on.
and mono manually. The
mode selected will appear
briefly in the display. The
car audio system will select
“STEREO” playback auto-
matically each time it is swit-
ched on.
TA. VOL
Adjusts the volume for traffic
announcements and the
warning beep.
The message will be heard
at this volume, if the stan-
dard volume is lower.
If the standard volume is set
higher than the TA VOL le-
vel, then the traffic report
will be played at the stan-
dard volume.
announcements and the
warning beep.
The message will be heard
at this volume, if the stan-
dard volume is lower.
If the standard volume is set
higher than the TA VOL le-
vel, then the traffic report
will be played at the stan-
dard volume.
ON VOL
Sets the turn-on volume. If
set to “VOL 0”, the unit will
automatically play at the vo-
lume last selected before it
was switched off.
automatically play at the vo-
lume last selected before it
was switched off.
Press “DSC” to save any changes made in
the settings and to quit the “DSC” menu.
the settings and to quit the “DSC” menu.
BA Grenoble RD169 gb 95%®
30.05.2002, 10:59 Uhr
40