Blaupunkt Hamburg CD70 User Manual

14

Setting the station

There are a number of ways to set the sta-
tion.

Automatic station search

➮

Press the   or   button, 

7

.

The next station that can be received is tuned
in.

Manual station tuning

You can also tune to the station manually:

➮

Press the   or   button, 

7

.

Setting station search sensitivity

You can choose whether to search only for
stations with strong signals, or whether weak
stations should be included:

➮

Select the waveband (AM or FM) to
which the setting should apply.

➮

Press the MENU button, 

8

.

➮

Press the   or   button, 

7

, until “FM-

SENS” or “AM-SENS” appears in the
display.

➮

Press the button   or  , 

7

.

The current sensitivity value is shown on the
display. “SENS 6” indicates the maximum
sensitivity for the reception of distant trans-
mitters, and “SENS 1” indicates the lowest
sensitivity.

➮

Set the desired sensitivity by pressing

 or  , 

7

.

➮

Press the OK button, 

5

, or the MENU

button, 

8

, to leave the menu. The set-

tings are then saved.

Saving a station

Saving a station manually

➮

Choose the desired memory level: FM I,
FM II, FMT, M or MT.

➮

Tune in the desired station as described
under “Setting the station”.

➮

Hold down the softkey, 

4

, indicating

the position [(“ST1” - “ST6”) where the
station is to be stored] for longer than
two seconds.

Saving a station automatically
(Travelstore)

You can also save the six strongest stations
in the area automatically. This is done in the
FMT and MT memory levels.

Note:
Any stations previously saved on this level will
be deleted.

To use the Travelstore function:

➮

Press the TUNE button, 

>

, when the

radio is operating.

The radio function menu is shown on the dis-
play.

➮

Press the softkey, 

4

, indicating “TS”.

Storing starts. “T-STORE” appears in the dis-
play. When the procedure is complete, the
station in memory location 1 on the FMT or
MT level is played.

Going to a pre-set station

➮

Select the memory level or waveband.

➮

Press the softkey, 

4

, indicating “ST1” -

“ST6” for the desired station.