Blaupunkt Car Stereo System TRUE User Manual

11

 

쏅 Press the SRC button 

@

 repeatedly until the 

desired audio source is displayed:

 • "CD": Inserted CD.

 • "SD(HC)": Inserted memory card

 • "USB FRONT" or "USB REAR": USB data 

carrier connected to the front or rear.

 • "IPOD FRONT" or "IPOD REAR": iPod con-

nected to the front or rear

 • "AUX": Connected external audio source.

 • The respective audio source can be select-

ed only if a corresponding CD is inserted or 
a corresponding device is connected.

 • A connected iPod is initially selected un-

der "USB" and, as soon as the iPod is recog-
nised, under "IPOD".

 • If the car sound system fi rst has to read 

the data of a connected device or data car-
rier before the playback, the display shows 
"READING". The duration of the reading 
depends on the data volume and design 
of the device or data carrier. If the device 
or data carrier is defective or the trans-
ferred data cannot be played back, a corre-
sponding message appears on the display 
(e.g. "CD ERROR").

Noncircular contoured CDs (shape CDs) 

and CDs with a diameter of 8 cm (mini CDs) must 
not be used.

We accept no responsibility for any damage to the 
CD drive that may occur as a result of the use of 
unsuitable CDs.

Note:
You must not hinder or assist the drive as it 
automatically draws in the CD.

 

쏅 Insert the CD with its printed side up into the 

CD tray 

5

 until you feel a slight resistance.

The drive automatically draws in the CD and 
checks its data. Afterwards, the playback 
starts in CD or MP3 mode. 

Note:
If the inserted CD cannot be played back, "CD 
ERROR" is briefl y displayed and the CD is au-
tomatically ejected after approx. 2 seconds.

Note:
You must not hinder or assist the drive as it 
ejects the CD.

 

쏅 Press the   button 

8

 to eject an inserted 

CD.

 • If a CD is ejected and not removed, the 

drive will automatically draw it back in 
again after approx. 10 seconds.

 • You can also eject CDs while the car sound 

system is switched off  or whilst another au-
dio source is activated. 

Note:
You can connect USB data carriers to the USB 
port at the front of the device as well as the 
rear USB port.

 

쏅 Switch off  the car sound system so that the 

data carrier will be correctly registered.

 

쏅 First, pull the protective cap of the USB port 

:

 to the front until it moves out of the port 

and fold it to the right to connect a data car-
rier to the USB port at the front of the device.

 

쏅 Connect the USB data carrier.

 

쏅 Turn on the car sound system.